ZXXL-Y good quality Transmission line frequency parameter testing
system
INTORDUCTION
Transmission Line Test System is a new generation power
transmission line frequency parameter testing system. It equips
with frequency conversion testing power, DFT Digital Filtering
Technique, which eliminates strong interference from power
frequency electric field, and ensures the safety of equipment,
convenient, fast and accurate measurement.
FEATURES
1. Quickly and accurately test the positive sequence capacitance,
the positive sequence impedance, zero sequence capacitance, zero
sequence impedance, also can measure the mutual inductance and
coupling capacitance between lines ;
2. High Anti-interference ability, accurate and reliable
measurement;
3. Easy operation, equipped with large LCD and American rotating
mouse and micro printer
4. Simple wiring, only connecting with tested down leads to finish
all line parameter measurement
5. High speed micro-controller as inner core, integrated structure
6. Fast testing process, one sequence parameter testing time is 1
min
7. Supplied with three groups different frequency power supply for
selection: 42.5Hz/57.5Hz, 45Hz/55Hz, 47.5Hz/52.5Hz, easily isolate
the power frequency and noise wave to ensure high precision
measurement of small signals.
PARAMETERS
| Input power source | Three phase AC380V±10% |
| Maximum output voltage | AC300V accuracy:1% |
| Maximum output current | 5A |
| Output signal frequency | 42.5Hz/57.5Hz；45Hz/55Hz；47.5Hz/52.5Hz；50Hz/50Hz |
| Measuring range | positive sequence capacitance, zero sequence capacitance, coupling
capacitance | positive sequence impedance, zero sequence impedance, mutual
inductive impedance | Impedance angle |
| 0.1-50μF | 0.5-400Ω | 0°～360° |
| Resolution | 0.01μF | 0.01Ω | 0.01° |
| Accuracy | 0.1μF～1μF: ±3%±0.05μF | 0.5Ω～1Ω:±3%±0.05Ω | ±0.2°(voltage>1.0V) |
| 1μF～50μF±1.5%±0.03μF | 01Ω～400Ω:±3%±0.03Ω | ±0.3°(voltage>0.2～1.0V) |
| Dimension | 535 mm×435 mm×360mm(not including wheel)weight: 61kg |
| Anti-interference Parameter | Interference voltage: longitudinal induced voltage after connect to
testing power: <350V |
| Interference current: when line ends are short circuited to
earth:<40A |
| Can accurately make measurements when the output signal and the
interference signal is 1:10 |
| Working environment | Temperature - 15℃ ~ +40℃ relative humidity ＜90% |
